GENERAL FEATURES • 8 or 14 pole backbone with double piercing connections • No need of wires conduit • Fulfils EN81 and ASME A17.1 standards • 1.5 mm2 and 0.75 mm2 cross sections • Derivation cables for data bus, Doors, Locks, and pit box serials. • Push-in connection technology for derivation cables connections • KonboX® for connecting the backbone to the derivation cables easily fixed on the hall door or hoistway wall • Installation time lower than 5 minutes/floor • Low effective cost for materials • Polarized cables to avoid human connection errors • Workshop or building site harness assembling • Harness Premanufactured supply available ABSOLUTE MAXIM RATINGS Operating temperature Storage temperature -15 ... +65 -10 ... +85 TECHNICAL DATA Maximum operating voltage Maximum current (Cross section 1,5 mm2) Backbone wires Ground isolation voltage Isolation between poles 250 ± 0% 12 8 or 14 500 500 ORDERING INFORMATION TOOLS Automatic cable processing KonboX® ACP65 The Automatic MW65 cable processing machine outputs the harness ready to be sent to the building site: • Cutting cables to selected lengths • Punching the backbone for security serial derivations and testing isolation • Cutting the side of derivation cables to retain them into the KonboX® • Placing end terminal blocks to cables • Pilling the outer sheaths • Winding the backbone cable • Labelling cables and the end box with information related to the customer and the installation number The machine is PC based and can be Ethernet connected to receive order specifications. Manual cable punching Absolutely necessary when connecting the backbone to the KonboX® in the hoistway, as it is necessary to punch the backbone for the security serial derivations Cable suspension Screws Cable suspension device .................. DIN7981.......... 4.8x25mm KonboX® fixed to door frame ........... DIN7985.......... M5x12mm KonboX® to hoistway wall ................ DIN7981.......... 4.8x13mm AUTOMATIC DOORS SEMIAUTOMATICS DOORS Smartlift, S.L. . C/ Solsonès, 87 / E-08211 - Castellar del Vallès - Bcn - SPAIN Tel. +34 937 451 999 . Fax. +34 937 451 896 / Nota Legal / E-mail: info@konbox.com